[LCA2019 Chat] Headless RPi setup

[Thilina Piyasundara]

Hi,

I use [1] to enable serial console over USB and [2] for enable wifi in the
PRi.

1. https://www.youtube.com/watch?v=ZuUyGn-AgGk
2.
http://coffeetime.solutions/configure-wifi-connection-raspbian-stretch-lite-raspberry-pi/

Thanks and regards,

Thilina Piyasundara
M: +94-71-775-0006
M: +64 210 8558 125
Blog: thilina.piyasundara.org
Linkedin: linkedin.com/in/thilinapiyasundara
<https://www.linkedin.com/in/thilinapiyasundara>


On Sat, Jan 26, 2019 at 10:27 PM Volker Kuhlmann <scripting at top.geek.nz>
wrote:

> On Sat 26 Jan 2019 21:17:21 NZDT +1300, martin f krafft wrote:
>
> > # grep dwc /proc/cmdline
> > 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416
> > bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:3B:08:DD
> > vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000
> > dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1
> > root=PARTUUID=9a617d9a-02 rootfstype=ext4 elevator=deadline
> > fsck.repair=yes rootwait modules-load=dwc2,g_cdc
> >                                      ^^^^^^^^^^
>
> I haven't powered up mine yet so all this is untried guesswork, but you
> say you're connecting to one of the micro-USB ports on the RPi. The
> kernel/getty/etc would possibly need to be told to open a console on
> this port. I see 2 console= parameters there, for the HW RS232 serial
> port, and probably the first console. So wild guess it needs a third
> console= parameter for that USB port?? Compare with someone who has this
> running successfully?
>
> Volker
>
> --
> Volker Kuhlmann <scripting at top.geek.nz>
> http://volker.top.geek.nz/
> --
> Chat mailing list
> Chat at lists.lca2019.linux.org.au
> http://lists.lca2019.linux.org.au/mailman/listinfo/chat
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lca2019.linux.org.au/pipermail/chat/attachments/20190127/65b6c5e8/attachment.html>